MonoFold

Sliding Folding Partitions

The MonoFold collection brings you a versatile solution for temporary room division where structural support from above is not available. The system bears its weight directly on to its low-profile floor track, screw fixed to the floor.

The head guide track is merely there to secure the top guide pins fixed to alternate panels to prevent lateral movement and guide the panels along to deploy the wall and stack it back.

Unlike the MonoWall these panels are permanently hinged together allowing the MonoFold, as the name suggests, to fold backwards and forwards in a zig-zag fashion.

The lead panel acts as a pass door through the system, operated by a flush fit handle (Unless the system is End Fold with an even number of panels).

You have two layout options available. Single Wing, where the partition is stacked at one end and moved out the full width of the opening. The second is the Bi-Parting version; the stack is at either end and the partition meets in the middle. Please see our stacking arrangements in this brochure.

Furthermore the top guide pins can be located in three positions, depending on specification. In the top of the panel to facilitate the panels to stack either centrally, to one side or offset, details of which can be found further on.

Simple to operate, with an internal espagnolette locking mechanism, allowing for rapid and easy layout changes. The choice of finishes. sound reduction levels and track systems allow a complete bespoke package to be offered

Quick Search Menu

Specification

Stacking Arrangements

Panel Options

Finish Options

Specialist Board Options

Download Centre

Specification

Suspension & Support:
Bottom rolling support via a low profile floor track with a head guide track for the top roller in every other panel.

Specification Sound Reduction Range:
Up to Rw50dB.

Operation:
Manual.

Weight Range:
25 Kg to 50 Kg per m2.

Maximum Height:
Up to 3,000 mm.

Maximum Panel Width:
Up to 900mm Panel Width – Centre Folding.
Up to 750mm Panel Width – End Folding/Eccentric Folding.

Panel Thickness:
Up to 100mm.

Maximum Opening Width:
Varies according to system height and configuration.

Panel Finishes:
Include: Laminate, Veneer, Dry Wipe, Magnetic Dry Wipe,
Vinyl, Paint, Pin Board, Fabric, or Primed for on-site
decoration by others.

Panel Profiles:
Satin Anodised Aluminium (SAA) as standard, Electrostatic Powder Coating (EPC) also available in all RAL colours.

Track Options:
Aluminium floor track track in Satin Anodised Aluminium (SAA)

Head Guide Track with matching Wall Jambs in Electrostatic Powder Coated (EPC) white. Also available with additional particle board pelmets.

Stacking Arrangements

MF1- Centre Fold Single Wing

MF2- End Fold Single Wing

There is a top guide roller centrally mounted in the top of every other panel with a locking mechanism in the opposing panels. The system pulls out from one side to close off the opening, with the lead panel being an active pass door.

Similar to MF1 but the top guide roller is mounted to one edge in the top of every other panel with a locking mechanism in the opposing panels. The system pulls out from one side to close off the opening, with the lead panel being an active pass door.

MF3- Centre Fold Bi-Parting

MF4- End Fold Bi-Parting

There is a top guide roller centrally mounted in the top of every other panel with a locking mechanism in the opposing panels. The system pulls out from both sides to close off the opening, with the lead panel from either side being an active and passive pass door respectively.

Similar to MF3 but the top guide roller is mounted to one edge in the top of every other panel with a locking mechanism in the opposing panels. The system pulls out from both sides to close off the opening, with the lead panel from either side being an active and passive pass door respectively.